点击图片查看原图
FUJI CP-43
1.电子板尺寸:最大限度为:457*356mm最小限度为: 80*50mm
2.零件:Tape,stick feeder:最大限度为.74 slots Tray: 10types
3.贴装速度:最快射击速度为0.7sec/shot(使用4种不同吸咀) 4.0sec/shot(tray component)注意:零件形状会影响设置速度
4.精确度:+/-0.05 mm for 4-sided parts with at least 48 leads +/-0.1mm for other parts
5.设备处理器:F4G & MCS30 & FLEXA
6.电源: 3-phase,200 to 480 VAC,3.0KVA
7.空气消耗量:0.5 Mpa(5kgf/cm2),60NI/min
(90 NI/5sec during tray discharge)
8.机器制造尺寸:
L2,940mm (extra 374 mm with MTU)
W1,644mm (including fencings)
H1,725mm (excluding signal tower)
9.重量:约3500kg
With MTU:大约4,250kg